Различия

Показаны различия между двумя версиями страницы.

--- 3sourse:1dacs:es9018 [2020/03/18 09:28]
staudio [Отзывы]
+++ 3sourse:1dacs:es9018 [2020/03/19 10:06]
staudio [ES9018]
@@ Строка 1: / Строка 1: @@
 ===== ES9018 =====
+ES9018 + LL1674 и LL1684:\\
+https://www.diyaudio.com/forums/quanghao-audio-design/246579-super-converted-ll1684-6.html
 {{ :3sourse:1dacs:es9012-9018.pdf |}}
@@ Строка 15: / Строка 18: @@
 ----
 In short, yes. ES9018 and its derivatives can support voltage mode or current mode. It depends on the input impedance where the next stage has. When it sees a low impedance, it's current mode. ES9023 has integrated amp for voltage out. I don't know if it can support current output.
-----ES9018 has some DC offset voltage on the output, so you need something to get rid of the DC before sending it to your amp. It makes about 3Vpp with a few mA of current if you parallel 4+4 channels for stereo. It sounds pretty good with just a transformer, but bass is lacking and mids not full bodied compared to Twisted Pear Buffalo32 with IC i/v stage. I sometimes wished for more than 1.5 V output, but it was usually enough.
+----
+ES9018 has some DC offset voltage on the output, so you need something to get rid of the DC before sending it to your amp. It makes about 3Vpp with a few mA of current if you parallel 4+4 channels for stereo. It sounds pretty good with just a transformer, but bass is lacking and mids not full bodied compared to Twisted Pear Buffalo32 with IC i/v stage. I sometimes wished for more than 1.5 V output, but it was usually enough.
 You can get the 9018 technical specsheet if you sign nondisclosure form.

Аудио-википедия

Инструменты пользователя

Инструменты сайта

Различия

Инструменты страницы